Copyright © 2024 Neeka Tubes All Rights Reserved. | Created & SEO by RATH INFOTECH
Titanium Gr.5 Nuts
- Home
- Titanium Gr.5 Nuts
Neeka Tubes is a leading manufacturer and supplier of Titanium Gr.5 Nuts, offering high-quality fastening solutions worldwide. Titanium Grade 5 Nut is a fastener which has low density, high strength and good corrosion resistance and is made from titanium with aluminium and vanadium. These nuts are widely used in different industries since they possess high strength, heat resistance and are very durable.
Our Ti Gr 5 nuts are made of 6% aluminum and 4% vanadium and possess a high strength and are also resistant to corrosion. They meet the ASTM B348 & ASME SB348 specifications and can be manufactured in accordance to ASTM, DIN, BS, GB & IS sizes. They are available in nominal sizes M3/M56 or 3/6” to 2” and lengths of 3mm to 200mm, but can be adjusted as per the requirement. It has a density of 4.43 g/cm³ and melting point of 1632°C and tensile and yield strength of 138000 and 128000 Psi respectively to ensure the best performance.
Titanium Nuts, Titanium Grade 5 Nuts, Titanium Grade 5 Bolts & Nuts, ASTM B348 UNS R56400 Bolts, Titanium Grade 5 Hex Nuts, Titanium Alloy Grade 5 Fasteners
Advantages of Titanium Gr.5 Nuts
- High Strength: High tensile and yield strength to meet the requirements of various applications.
- Corrosion Resistance: Excellent resistance to oxidation and harsh environments.
- Low density – The material is lightweight thus reducing the overall weight without affecting its strength.
- Heat Resistance: This material is suitable for use in harsh environments.
- Sizes: The products can be produced in different sizes and dimensions depending on the requirements of the client.
Titanium Gr 5 nuts are widely used in industries requiring strength and corrosion resistance. These include petrochemicals, pharmaceuticals, gases, paper & pulp, heat exchangers, condensers, seawater equipment, specialty chemicals and others. Their lightweight nature makes them ideal for aerospace and marine applications.
Quality Tests for Titanium Grade 5 Nut
Ti Gr5 nuts are tested for quality to make sure that they offer the best performance and are also long lasting. The Hardness Test determines the measure of the strength of the material while the Pitting Resistance Test confirms maximum corrosion resistance. The Positive Material Identification (PMI) Test also ensures the exact composition of the alloy, ensuring reliability and compliance with industry standards for use in critical applications in different industries.
Most Common Types of Titanium Gr.5 Nuts
Titanium Gr.5 Nut
Titanium Gr 5 Flanged Nylon Nut
Titanium Gr 5 M8 Nut
M5 Nylon Insert Lock Nut
Titanium Gr 5 Wheel Lock Nut
Dome Nut
Titanium Gr 5 Hex Nut
Titanium Gr 5 Rivet Nut
Titanium Gr.5 Nuts Specifications
| Specification | ASTM B348 / ASME SB348 |
|---|---|
| Size | Cold Forming process: M2-M24 Hot Forging process: M24-M100, 1-1/2” Dia, up to 1100mm lg CNC Machining for M100 / 4” Dia, up to 1500mm lg Manufacturing M2 to M160 and Custom Metric Titanium Grade 5 Hex Nuts |
| Hex Nuts Size Metric | Dia: M10 – M110 / Length: 12 – 1200MM |
| Hex Nuts Size Inch | Dia: 1/2″ – 4.0″ / Length: 1/2″ – 52″ |
| Length | 3 to 200 mm |
| Standard | ISO, IS, ANSI, ASME, UNI, ASTM, DIN, JIS, IS, GB, BS, CSN, EU, IFI, PN, and all International Standards |
| DIN Standard | DIN 934, DIN 982, DIN 985, DIN 936, DIN 929, DIN 1587, DIN 439, DIN 315 |
| UTS | NPT, UNS, UNF, UNC, UNEF, NPTF |
| ISO | ISO 4014, ISO 4017, ISO 4032, ISO 4162, ISO 4161 |
| Threads | METRIC, BSW, UNC, UNF, BSF or as required |
| Hex Nuts Coating | PTFE Coated, Nickel Plated, Hot Dip Galvanized, Yellow Zinc Plated, Zinc Cobalt Plated, Black Phosphate, Blue Zinc Plated, Aluminium Zinc Flake Coated, Black Zinc Plated, Zinc Plated |
| Hex Nuts Forming | Hot Forged Hex Nuts & Cold Forged Hex Nuts |
| UTS – Unified Thread Standard | UNC, UNF, NPT, UNS, UNEF, NPTF |
| ASME Standard | ASME B18.2.2 / ASME B18.16.6 / ASME B18.16.4 / ASME B18.2.2 |
Titanium Nuts, Titanium Grade 5 Nuts, Titanium Grade 5 Bolts & Nuts, ASTM B348 UNS R56400 Bolts, Titanium Grade 5 Hex Nuts, Titanium Alloy Grade 5 Fasteners
Titanium Gr.5 Nuts Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Titanium Gr. 5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Mechanical Properties of Titanium Gr.5 Nuts
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Equivalent Grades For Titanium Gr.5 Nuts
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 5 | 3.7165 | N56400 |
Contact Neeka tubes today for a best offer & competitive quotation Of Titanium Gr.5 Nuts. Please Call on +91 7700067892 or drop an E-Mail : sales@neekatubes.net
Titanium Gr.5 Nuts Sizes
Nominal or Basic Major Diameter of Nut Thread | Grade 2 Titanium Nuts Width Across Flats (F) | Width Across Corners (G) | Thickness of Titanium Grade 2 Hex Nuts (H) | ||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | 0.2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | 0.226 | 0.212 |
| 5/16 | 0.3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | 0.273 | 0.258 |
| 3/8 | 0.3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | 0.337 | 0.320 |
| 7/16 | 0.4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | 0.385 | 0.365 |
| 1/2 | 0.5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | 0.448 | 0.427 |
| 9/16 | 0.5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | 0.496 | 0.473 |
| 5/8 | 0.6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | 0.559 | 0.535 |
| 3/4 | 0.7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | 0.665 | 0.617 |
| 7/8 | 0.8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | 0.776 | 0.724 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | 0.887 | 0.831 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | 0.999 | 0.939 |
| 1-1/4 | 1.2500 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 1-1/16 | 1.094 | 1.030 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/2 | 1.5000 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.317 | 1.245 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 2 | 2.000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.456 | 2-3/8 | 2.431 | 2.319 |
| 3 | 3.000 | 4-1/2 | 4.500 | 4.350 | 5.196 | 4.959 | 2-19/32 | 2.654 | 2.534 |
Titanium Gr.5 Nuts Weight Chart
| Size | Hex Finished Nut | Heavy Hex Nut | Square Nut | Hex Finished Jam Nut |
|---|---|---|---|---|
| ¼” | 0.007 | 0.013 | ||
| 3/8” | 0.029 | 0.031 | 0.040 | |
| ½” | 0.038 | 0.065 | 0.057 | 0.027 |
| 5/8” | 0.073 | 0.119 | 0.049 | 0.108 |
| ¾” | 0.119 | 0.193 | 0.077 | 0.154 |
| 7/8” | 0.190 | 0.297 | 0.120 | 0.245 |
| 1” | 0.283 | 0.425 | 0.177 | 0.363 |
| 1 1/8” | 0.403 | 0.592 | 0.247 | 0.525 |
| 1 ¼” | 0.543 | 0.786 | 0.361 | 0.706 |
| 1 3/8” | 0.730 | 1.020 | 0.479 | 0.945 |
| 1 ½” | 0.943 | 1.310 | 0.609 | 1.220 |
| 1 5/8” | 1.620 | 0.916 | ||
| 1 ¾” | 1.510 | 2.040 | 1.000 | |
| 1 7/8” | 2.410 | 1.340 | ||
| 2” | 2.240 | 2.990 | 1.400 | |
| 2 1/8” | 3.350 | |||
| 2 ¼” | 4.200 | |||
| 2 ½” | 5.640 | |||
| 2 ¾” | 7.390 | |||
| 3” | 9.500 | |||
| 3 ¼” | 11.940 | |||
| 3 ½” | 15.260 | |||
| 3 ¾” | 18.120 | |||
| 4” | 21.830 |
Titanium Gr.5 Nuts Dimensions
| DIA | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 | M42 | M45 | M48 | M52 |
| Pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 |
| Across Flat (S) Max Min | 7 | 8 | 10 | 13 | 16 | 18 | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
| 6.78 | 7.78 | 9.78 | 12.73 | 15.73 | 17.73 | 20.67 | 23.67 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | |
| Thickness (M) MaxMin | 3.2 | 4.7 | 5.2 | 6.8 | 8.4 | 10.8 | 12.8 | 14.8 | 15.8 | 18 | 19.4 | 21.5 | 23.8 | 25.6 | 28.7 | 31 | 33.4 | 34 | 36 | 38 | 42 |
| 2.9 | 4.4 | 4.9 | 6.44 | 8.04 | 10.37 | 12.1 | 14.1 | 15.1 | 16.9 | 18.1 | 20.2 | 22.5 | 24.3 | 27.4 | 29.4 | 31.8 | 32.4 | 34.4 | 36.4 | 40.4 | |
| Across corners (E) Min | 7.66 | 8.79 | 11.05 | 14.38 | 17.77 | 20.03 | 23.35 | 26.75 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 |
| Minor Dia at thread (min) | 3.242 | 4.134 | 4.917 | 6.647 | 8.376 | 10.106 | 11.835 | 13.835 | 15.294 | 17.294 | 19.294 | 20.752 | 23.752 | 26.211 | 29.211 | 31.67 | 34.67 | 37.129 | 40.129 | 42.587 | 46.587 |
| Minor Dia at thread (max) | 3.422 | 4.334 | 5.153 | 6.912 | 8.676 | 10.441 | 12.210 | 14.210 | 15.744 | 17.774 | 19.774 | 21.252 | 24.252 | 26.771 | 29.771 | 32.27 | 35.27 | 37.799 | 40.799 | 43.297 | 47.297 |
Titanium Gr.5 Nuts Packing & Marking
Packaging & Marking Details
Every Titanium Grade 5 Nut is also marked with grade, size, standard, and batch number to enhance its traceability. Also, we give proper labeling to make sure that the product is genuine and has met the required standards. They are packed in wooden boxes, cartons or plastic bags to avoid shifting or any other form of handling during transportation. Custom packaging can be provided according to client requirements.
Searching for ready stock of Titanium Gr.5 Nuts in Mumbai?
Industrial Application of Titanium Gr.5 Nuts
Product Category
Request For Quotation
Do Not Hesitate to Get in Touch With Us. Within Two Business Days, We Will Respond to You. Or Give Us a Call Right Now.