Copyright © 2024 Neeka Tubes All Rights Reserved. | Created & SEO by RATH INFOTECH
Titanium Gr.5 Bolts
- Home
- Titanium Gr.5 Bolts
Neeka Tubes is a leading manufacturer of Titanium Gr.5 Bolts offering the best quality fasteners across the globe. Grade 5 Titanium Bolts are characterized by high strength, high resistance to corrosion and low density. These bolts are commonly used where high performance is required making them a preferred choice across multiple industries.
Our Titanium Grade 5 Bolts are made of 90% titanium, 6% aluminum and 4% vanadium. All of these bolts meet ASTM B 348, ASME SB 348, DIN, ASTM, BS and other international standards. Available in sizes ranging from M3 to M56 with lengths of 3 mm to 65 mm, they deliver a minimum yield strength of 880 MPa and tensile strength of 950 MPa, maintaining excellent durability under extreme conditions.
Titanium Bolts, Titanium Grade 5 Bolts & Nuts, Titanium Gr 5 Hex Bolt, ASTM B348 UNS R56400 Nuts, Alloy Gr 5 Hex Bolt Titanium Fasteners Suppliers
Benefits of Titanium Gr.5 Bolts
- High Strength & Lightweight: Titanium Grade 5 bolts deliver exceptional tensile strength that rivals steel. They weigh about 40% less than steel fasteners of the same size. This weight reduction matters in aerospace and racing applications. The strength-to-weight ratio makes them ideal for projects where every gram counts.
- Corrosion Resistance: These bolts resist rust and chemical damage in harsh environments. Saltwater, acids, and industrial chemicals won’t break them down. A protective oxide layer forms naturally on the surface. It can be used in marine equipment without worrying about decay.
- Heat Resistance: Grade 5 titanium maintains its strength at temperatures up to 400°C. The material won’t weaken or warp under thermal stress. Engine components and exhaust systems benefit from this stability. Performance stays consistent even in extreme heat conditions.
- Non-Magnetic & Biocompatible: The bolts produce no magnetic interference with sensitive equipment. Medical devices and electronic systems work safely around them. The material is also safe for human tissue contact. Surgeons use these fasteners in bone repairs and implants.
- Long-Lasting Performance: Titanium Gr. 5 bolts from quality suppliers maintain their properties for decades. They need minimal maintenance compared to other fasteners. The initial cost pays off through extended service life. You’ll replace them far less often than standard bolts.
Titanium Gr.5 bolts are found in a wide variety of industries, including aerospace, marine, automotive, and medical industries. They are commonly found in jet engines, shipbuilding, sports equipment and surgical implants. ASTM F468 Ti Gr 5 bolts have excellent strength and corrosion resistance making them perfect for offshore structures, defense and high-performance vehicles.
Titanium Grade 5 Bolts Tests & Certifications
We ensure the highest quality standards by conducting thorough tests, including hardness, tensile, impact and chemical analysis. Every batch of Titanium Grade 5 Bolts is tested for precision and durability. Certifications such as Mill Test Certificate (MTC), third-party inspection reports and EN 10204/3.1B certification ensure compliance with international quality standards.
Most Common Types of Titanium Gr.5 Bolts
Titanium Gr.5 Bolts
M6 Tapered Head Titanium Gr.5 Bolts
M5 Titanium Gr.5 Bolts Cap Socket Head
Titanium Gr.5 Hex Bolt 48mm
Titanium Gr.5 Stud Bolt
Titanium Gr.5 Hex Bolt
Allen Titanium Gr.5 Bolts
Titanium Alloy Gr.5 Bolts
Titanium Gr.5 Bolts Specifications
| Specification | ASTM B348, / ASME SB348 |
|---|---|
| Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Length | 3 to 200 mm |
| Standard | ISO, ASTM, DIN, JIS, IS, GB, BS, and all International Standards |
| DIN Standard | B.S. DIN 931, DIN 933, DIN 912, DIN 934, DIN 6923, DIN 603, DIN 7981, DIN 970, DIN 916, DIN 7982, DIN 7985, DIN 913 |
| UTS | NPT, UNS, UNF, UNC, UNEF, NPTF |
| ISO | ISO 4033, ISO 4032, ISO 7380, ISO 4017, JIS standards |
| Threads | METRIC, BSW, UNC, UNF, BSF or as required |
Titanium Bolts, Titanium Grade 5 Fasteners, Titanium Gr 5 Hex Bolt, Titanium Grade 5 Bolts & Nuts, Titanium Alloy Grade 5 Fasteners
Titanium Gr.5 Bolts Chemical Composition
Titanium Gr 5 | C | Ti | N | Fe | H | O | V | Al |
0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Mechanical Properties of Titanium Gr.5 Bolts
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
Equivalent Grades For Titanium Gr.5 Bolts
ANDARD | UNS | WERKSTOFF NR. |
Titanium Gr 5 | R56400 | 3.7165 |
Contact Neeka tubes today for a best offer & competitive quotation Of Titanium Grade 5Please Call on +91 7700067892 or drop an E-Mail : sales@neekatubes.net
Titanium Gr.5 Bolts Sizes
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
Titanium Hex Bolts Weight Chart
| Dia Length | M12 | M16 | M20 | M22 | M24 | M27 | M30 | M36 |
| 30 | 49.1 | |||||||
| 35 | 53.6 | |||||||
| 40 | 58.0 | 105 | ||||||
| 45 | 62.1 | 113 | 188 | |||||
| 50 | 66.6 | 121 | 200 | 257 | ||||
| 55 | 71.0 | 129 | 212 | 272 | ||||
| 60 | 75.4 | 137 | 225 | 286 | 362 | |||
| 65 | 79.9 | 145 | 237 | 301 | 380 | |||
| 70 | 84.3 | 153 | 249 | 316 | 398 | 532 | ||
| 75 | 88.8 | 160 | 262 | 331 | 415 | 554 | 701 | |
| 80 | 93.2 | 168 | 274 | 346 | 433 | 576 | 728 | |
| 85 | 97.6 | 176 | 286 | 361 | 451 | 599 | 756 | 1184 |
| 90 | 102 | 184 | 298 | 375 | 467 | 621 | 784 | 1224 |
| 95 | 107 | 192 | 310 | 390 | 485 | 644 | 812 | 1264 |
| 100 | 199 | 322 | 405 | 503 | 665 | 838 | 1304 | |
| 105 | 207 | 335 | 420 | 520 | 688 | 865 | 1336 | |
| 110 | 215 | 347 | 435 | 538 | 710 | 893 | 1376 | |
| 115 | 223 | 359 | 450 | 556 | 732 | 921 | 1415 | |
| 120 | 231 | 372 | 465 | 574 | 755 | 949 | 1455 | |
| 125 | 239 | 384 | 479 | 591 | 777 | 976 | 1495 | |
| 130 | 247 | 396 | 494 | 609 | 800 | 1004 | 1535 | |
| 135 | 409 | 509 | 627 | 822 | 1032 | 1575 | ||
| 140 | 421 | 524 | 645 | 845 | 1059 | 1615 | ||
| 145 | 433 | 539 | 662 | 867 | 1087 | 1655 | ||
| 150 | 446 | 554 | 680 | 890 | 1115 | 1695 | ||
| 155 | 458 | 569 | 698 | 912 | 1143 | 1735 | ||
| 160 | 584 | 716 | 935 | 1170 | 1775 | |||
| 165 | 599 | 733 | 957 | 1198 | 1815 | |||
| 170 | 751 | 979 | 1226 | 1855 | ||||
| 175 | 769 | 1002 | 1254 | 1895 | ||||
| 180 | 787 | 1024 | 1281 | 1935 | ||||
| 185 | 804 | 1047 | 1309 | 1974 | ||||
| 190 | 822 | 1069 | 1337 | 2014 | ||||
| 195 | 840 | 1092 | 1365 | 2054 | ||||
| 200 | 1114 | 1392 | 2094 |
Titanium Hex Bolts Dimension Chart
| NOMINAL SIZE (D) | ACRO THE FLATS | HEAD THICKNESS | BODY DIA. | ACRO CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| F (MAX) | F (MIN) | H (MAX) | H (MIN) | D (MAX) | D (MIN) | C (MAX) | C (MIN) | |
| m20 | 30.00 | 29.16 | 12.88 | 12.12 | 20.00 | 19.67 | 34.64 | 32.95 |
| m12 | 19.00 | 17.73 | 7.76 | 4.24 | 12.00 | 11.73 | 20.78 | 20.03 |
| m14 | 22.00 | 20.67 | 9.09 | 8.51 | 14.00 | 13.73 | 24.25 | 23.35 |
| m10 | 17.00 | 15.73 | 6.63 | 6.17 | 10.00 | 9.78 | 18.48 | 17.77 |
| m16 | 24.00 | 23.67 | 10.32 | 9.68 | 16.00 | 15.73 | 27.71 | 26.75 |
| m30 | 46.00 | 45.00 | 19.48 | 17.92 | 30.00 | 29.67 | 53.12 | 50.85 |
| m24 | 36.00 | 35.00 | 15.44 | 14.56 | 24.00 | 23.67 | 41.57 | 39.55 |
| m100 | 145.00 | 140.00 | 63.9 | 60.10 | 90.00 | 99.13 | 167.43 | 159.60 |
| m36 | 55.00 | 53.80 | 23.38 | 21.63 | 36.00 | 35.61 | 63.51 | 60.79 |
| m48 | 75.00 | 72.60 | 31.07 | 28.93 | 48.00 | 47.38 | 86.60 | 82.76 |
| m56 | 85.00 | 82.20 | 36.2 | 33.80 | 56.00 | 55.26 | 98.15 | 93.71 |
| m42 | 65.00 | 62.90 | 26.97 | 25.03 | 42.00 | 41.38 | 75.06 | 71.71 |
| m64 | 95.00 | 91.80 | 41.32 | 38.68 | 64.00 | 63.26 | 109.70 | 104.65 |
| m80 | 115.00 | 111.00 | 51.58 | 48.42 | 80.00 | 79.26 | 132.72 | 126.54 |
| m72 | 105.00 | 101.40 | 46.45 | 43.55 | 72.00 | 71.26 | 121.24 | 115.60 |
| m90 | 130.00 | 125.50 | 57.74 | 54.26 | 90.00 | 89.13 | 150.11 | 143.07 |
Titanium Gr.5 Bolts Packing & Marking
Packaging & Marking Details
To maintain product integrity of titanium Alloy Gr-5 Bolts we securely packed them in wooden boxes, cartons and bubble wraps. Also, custom labeling ensures easy identification. Orders are processed quickly with reliable global shipping to ensure timely delivery. Each ASTM F468 Ti Gr 5 bolt is marked with specifications for traceability and quality assurance.
Searching for ready stock ofTitanium Gr.5 Bolts in Mumbai?
Industrial Application of Titanium Gr.5 Bolts
Product Category
Request For Quotation
Do Not Hesitate to Get in Touch With Us. Within Two Business Days, We Will Respond to You. Or Give Us a Call Right Now.